enLanguage

Zotion 5 Axis Dental Milling Machine

Zotion 5 Axis Dental Milling Machine,which is a dry and high precision milling machine for dental lab and milling center. It can mill zirconia,wax,pmma,peek. 5 Axis Dry dental Cnc Milling Machine For CAD CAM Zirconia Discs uses high quality spindle and servo motor,which ensures the stability of the milling machine. It can accommodate milling materials with diameters of 98mm and 98.5mm and a maximum thickness of 80mm. The XYZ axis can reach speeds of up to 4000mm/min (Z axis) and 6000mm/min (XY axis), while the spindle speed range is 6000 to 60,000 revolutions per minute. The A axis offers full rotation (+/- 360°) and the B axis has a range of 25° to 115°. The machine features an automatic milling drill mount with a drill of 4mm diameter and 56mm length. It is controlled via NC code and has USB 2.0 and 100M internet access for easy data transfer. The machine is powered by a 220V ±10%, 50/60 Hz power supply, consumes very little electricity, and has a noise level of less than 45 dBA in standby mode and less than 70 dBA during milling (depending on the material). Installation is simple and requires indoor installation at an altitude of less than 2000 meters and a temperature between 5-40°C. The machine has compact dimensions (470 x 560 x 650 mm) and weighs 90 kg.

Products Description

 

The processing capacity of the Zotion 5 Axis Dental Milling Machine five-axis CNC milling machine is very powerful, capable of processing materials with a diameter of 98mm and 98.5mm and a thickness of up to 80mm.

Things to note when milling materials with Zotion 5 Axis Dental Milling Machine:

1. Choose the right tool and cutting parameters
Tool selection: Choose a tool that is suitable for the material being processed (such as zirconia, wax, PMMA, PEEK, etc.). Different materials require different types of tools, for example, wax and PMMA can use ordinary high-speed steel tools.
Cutting parameters: For hard materials (such as zirconia), lower feed rates and higher spindle speeds are required to avoid tool wear.
2. Ensure that the material is firmly fixed
During the milling process, loose materials may cause reduced cutting accuracy or even damage to the tool or equipment. Special fixtures or fixtures can be used to fix the material.
3. Avoid overheating
During the milling process, the temperature of the spindle and tool may rise rapidly when processing hard materials. Excessive temperature can cause material deformation, increased tool wear, and affect processing accuracy. Therefore, it is necessary to check the temperature of the spindle and tool regularly and cool them when necessary, or use a suitable coolant.
4. Keep the equipment clean
The milling process generates a lot of chips and dust, especially when milling hard materials such as zirconia, the chips may cause wear on the equipment. Keep the inside of the machine clean and regularly clean the cutting area, filters and chip removal system to avoid dust and chips affecting the operating stability of the equipment.

5. Monitor noise and vibration
When processing hard materials, pay attention to the noise and vibration of the equipment. Excessive noise or vibration may mean that the tool is not sharp, the cutting parameters are not suitable, or the equipment is faulty.

Products parameter

 

 

Products Details

 

 

 

Products advantages

 

 

 

factory
 
2500+㎡

Cover Area

 
15+

years experience

 
120+

Exported Countries

 
24h

Customer Services

 

Products certificates

 

customer feedback

 

 

 

Hot Tags: dental cad cam,cad cam,cad cam milling machine.milling machine ,dental,dental lab

 

Previous: Dental Zirconia Milling Machine
Next: No Information

 

Open Mobile Site

You Might Also Like